Automotive Trim Adhesive Tape
- Sizes: 3 mm-1240 mm slit rolls
- Colors: black, clear, white, gray
- Materials: foam, PET, tissue, transfer adhesive
- Adhesive: acrylic PSA, modified acrylic, LSE grade
- Thickness: 0.05 mm-1.2 mm typical
- Supply: rolls, laminated rolls, kiss-cut parts, die-cut parts
Automotive Trim Adhesive Tape is a pressure-sensitive bonding material for interior/exterior trim bonding, nameplate attachment, emblem mounting, plastic trim, painted metal accessories, and small decorative parts. Two Face Tape Company is the manufacturer of this product, supplying foam, PET, tissue, and transfer adhesive structures for different automotive assembly needs. The tape can be slit, laminated, or die-cut, with optional LSE adhesive or primer-assisted bonding for PP, TPO, EPDM, textured plastic, and coated trim surfaces.
Product Video
Product Photo
Product Overview
This automotive trim bonding tape is made for automotive accessory manufacturers, trim converters, and assembly plants that need repeatable bonding performance across different materials. It is suitable for interior decorative panels, exterior small trim, badges, nameplates, emblems, plastic inserts, chrome-plated parts, and painted metal accessories.
The right structure depends on the part design. A 0.05 mm-0.15 mm PET or tissue carrier gives a thin and stable bond line for flat nameplates, smooth badges, and printed decorative plates. A 0.2 mm-0.5 mm foam carrier helps improve wet-out on slightly uneven plastic trim. For parts that need gap filling, vibration cushioning, or a cleaner hidden black bond line, a 0.6 mm-1.2 mm foam or acrylic foam grade is usually more suitable.
Surface condition matters as much as adhesive strength. Painted metal, clear coat, ABS, PC, PMMA, chrome-plated plastic, PP, TPO, EPDM, and coated trim can show different bonding results because of surface energy, mold-release residue, coating type, and surface texture. For difficult low-surface-energy materials, LSE adhesive or primer-assisted bonding should be confirmed through 24h, 48h, and 72h dwell observation.
Benefits
- Bonds interior and exterior trim without screws, clips, or visible fasteners.
- Offers foam, PET, tissue, and transfer adhesive options from 0.05 mm-1.2 mm.
- Matches flat nameplates, small emblems, decorative plastic trim, and painted metal parts.
- Provides typical peel adhesion of 12-28 N/25 mm on painted metal after 24h dwell, depending on grade.
- Supports LSE or primer-assisted grades for PP, TPO, EPDM, textured trim, and coated plastic.
- Helps reduce edge lifting, adhesive transfer, edge ooze, liner tearing, and unstable positioning during converting.
- Can be supplied as slit rolls, laminated rolls, kiss-cut parts, or die-cut automotive adhesive tape.
- Low odor and low VOC adhesive options are available for selected interior trim grades.
- Sample bonding can be checked after 24h, 48h, and 72h before mass production.
How should automotive trim adhesive tape be selected for plastic trim, painted metal, and decorative parts?
Automotive trim adhesive tape should be selected by carrier type, adhesive grade, surface condition, and required bond-line thickness. Thin PET or tissue grades are better for flat nameplates and smooth decorative plates where a low profile is important. Foam grades are more forgiving when plastic trim has small gaps, texture, or minor unevenness. Painted metal and clear coat often bond well with standard acrylic PSA after cleaning and pressure. PP, TPO, EPDM, and some coated plastic parts usually need LSE adhesive or primer-assisted validation to reduce early edge lifting.
Product Packaging
Product Production
TDS
Item Typical Value Product Type Automotive Trim Adhesive Tape for interior/exterior trim bonding Application Style Automotive trim bonding tape, nameplate adhesive tape, automotive emblem adhesive tape Carrier Options PE foam, acrylic foam, PET film, tissue, transfer adhesive Thickness Range 0.05 mm-1.2 mm, selected by trim size and surface gap Thin Grade 0.05 mm-0.15 mm PET/tissue for flat nameplates and decorative plates Medium Grade 0.2 mm-0.5 mm foam for small trim and slight unevenness Thick Grade 0.6 mm-1.2 mm foam/acrylic foam for gap filling and hidden bond line Color Options Black, clear, white, gray Adhesive System Acrylic PSA, modified acrylic PSA, LSE acrylic option Liner Options Red PE film, white paper, glassine paper, PET release liner Surface Compatibility Painted metal, clear coat, ABS, PC, PMMA, PP, TPO, EPDM, coated plastic trim 180 Degree Peel on Painted Metal 12-28 N/25 mm after 24h dwell, grade dependent 180 Degree Peel on ABS/PC/PMMA 10-24 N/25 mm after 24h dwell, surface dependent 180 Degree Peel on PP/TPO 7-18 N/25 mm with LSE or primer-assisted grade Static Shear >=24h at 23 C with suitable bonded area and load Service Temperature -30 C to 90 C typical, short-term 120 C by grade Application Temperature Recommended above 15 C Dwell Observation 24h, 48h, and 72h peel and edge lifting check Slitting Tolerance +/-0.2 mm for narrow rolls, wider tolerance by width Die Cutting Rotary die-cut, flat-bed die-cut, kiss-cut parts Kiss-Cut Depth Control Liner not cut through, adhesive edge kept clean
Loading Container
Applications
- Interior trim strips, decorative panels, and small plastic inserts
- Exterior small trim pieces, badges, emblems, and nameplates
- Nameplate adhesive tape for flat metal or plastic identification plates
- Automotive emblem adhesive tape for small badges and decorative logo parts
- Plastic trim adhesive tape for ABS, PC, PMMA, PP, TPO, EPDM, and coated plastic
- Painted metal accessory bonding where drilling or visible fasteners are not preferred
- Chrome-plated plastic trim and coated decorative automotive accessories
- Low-profile PET or transfer adhesive bonding for smooth flat parts
- Tissue carrier tape for lightweight interior trim and soft material lamination
- Bulk slit rolls, laminated rolls, kiss-cut parts, and die-cut automotive adhesive tape
What affects primer optional bonding when automotive trim tape is used in bulk slitting or die-cut parts?
Primer optional bonding depends on surface energy, surface cleanliness, adhesive grade, pressure, and dwell time. Smooth painted metal, clear coat, ABS, PC, and PMMA often perform well after proper cleaning and firm application pressure. PP, TPO, EPDM, powder-coated parts, textured trim, or molded plastic with release residue may need LSE adhesive or primer-assisted bonding. During die cutting, stable liner release, clean kiss-cut depth, low edge ooze, and no adhesive transfer during matrix removal help keep parts clean and easy to apply. For narrow slit rolls, +/-0.2 mm tolerance and stable roll tension help reduce wrinkling, skewing, and early edge lift.
FAQ
Is Automotive Trim Adhesive Tape suitable for both interior and exterior trim?
Yes. Foam, PET, tissue, and transfer adhesive grades can be selected for different interior/exterior trim bonding requirements.
Can it be used for nameplates and emblems?
Yes. Thin PET/tissue grades suit flat nameplates, while foam grades support small badges and emblems with slight surface unevenness.
Does every plastic trim application need primer?
No. Primer depends on plastic type, surface energy, coating condition, and test results. PP, TPO, and EPDM often need LSE or primer-assisted validation.
What should be tested before mass production?
Check 24-72h dwell adhesion, edge lifting, liner release, die-cut edge cleanliness, adhesive transfer, and compatibility on actual trim materials.
